Table of Contents
Advertisement
future login.
3.3 Logging Setting
System log configuration is checked in above page. Remote log server can be
configured, system log can be saved on the remote server as backup use. Enable or
disable the remote backup function in this page, "server IP address" need to be entered
manually.
3.4 Port Setting
Port Status: The user can enable or disable a port in this page.Click "Enable" to open the port,
click "Disable" to close the port, the default setting is "Enable".
Port Mode: 6 modes can be configured:Auto-negotiation,10 Half,10 Full,100 Half, 100 Full
and1000 Full. Default mode is Auto-negotiation, can be changed in pull-down list.
Flow Control: This function is defaulted closed, open it when needed.
Loop Detection:The function is defaulted closed, open it when needed.A port will be blocked
to cut the loop when loop is detected.( Notice: the port link indicator in front panel will be still
on when the port is blocked, for the physic connection is existed; while the link indicator on
Picture 3.3.1 Logging Setting
Picture 3.4.1 Port Setting
Page 18 of 34
User's Guide
Advertisement
Table of Contents
