Toshiba e-studio 151 Operator's Manual page 80

SPECIAL FUNCTIONS
Adding a original to polling memory:
Use this procedure to add an original to another
original that has already been scanned into polling
memory. Place the original in the ADF/RADF or on the
document glass and follow the steps below.
1
Press the [MENU] key.
2
Press the [ ] key (
until "7:MEMORY POLL MODE"
appears, and then press the [ENTER]
key.
Selection
"7:MEMORY POLL MODE"
3
Press the [ ] key (
until "1:SET" appears, and then press
the [ENTER] key.
Selection
"1:SET"
4
Press the [ ] key (
to select the number of times polling
transmission will take place and press
the [ENTER] key.
5
Press the [START] key (
76
) or [ ] key (
) or [ ] key (
) or [ ] key (
"1:1 TIME" or
"2:REPEAT" can be
selected as the number
of polling operations
allowed.
).
Deleting originals from polling memory:
Follow the steps below to delete originals that have
been scanned into polling memory.
1
Press the [MENU] key.
2
) Press the [
until "7:MEMORY POLL MODE"
appears, and then press the [ENTER]
key.
Selection
"7:MEMORY POLL MODE"
3
) Press the [
until "2:CLEAR" appears, and then
press the [ENTER] key.
Selection
"2:CLEAR"
4
) Press the [START] key.
] key ( ) or [ ] key (
] key ( ) or [ ] key (
)
)