Two-Sided Original Transmission Function (When An Radf Is Installed) - Toshiba e-studio 151 Operator's Manual

HOW TO USE THE FAX FUNCTION
TWO-SIDED ORIGINAL TRANSMISSION FUNCTION
(when an RADF is installed)
The RADF can be used to automatically fax a two-sided original. If desired, the back of the original can be rotated
180° before transmission.
• The original must be placed in the RADF when using the two-sided original transmission function. The
Note
document glass cannot be used.
• The two-sided original transmission function cannot be selected when direct transmission mode is selected.
Likewise, direct transmission mode cannot be selected when the two-sided original transmission function is
selected.
Follow these steps to fax a two-sided original:
1
Place the original(s) in the RADF.
(p.52)
Original face up
2
Press the [2-SIDED TX] key until the
appropriate setting appears.
SPEED/ BROAD- RECEPTION REDIAL/
MEMORY SEARCH CAST MODE PAUSE
RESOLU- COVER
SHEET
TION CONTRAST REPORT 2-SIDED TX
LINE STATUS SPEAKER
Select the setting according to the original type
(booklet or tablet) as indicated below. If the setting is
incorrect, every other page of the received fax will be
inverted.
Booklet
58
For the size and weight of
two-sided originals that
can be scanned using the
RADF, see page 50.
The selections are as
follows:
OFF
ON (ROTATE)
ON (NON-ROTATE)
If you are faxing a
two-sided booklet type
original, select "ON
(ROTATE)".
Tablet
To cancel this function, select "OFF".
3
Press the [ENTER] key.
If you are faxing a
two-sided tablet type
original, select "ON
(NON-ROTATE)".