Side-Discharging The Clippings - Toro 22in Recyler Manual

1. Notches
2. Rear deflector
2. Install the grass bag, ensuring that the pins on the bag
rest in the notches on the handle
3. Lower the rear deflector.
Removing the Grass Bag
To remove the bag, reverse the steps above.
G017285
Figure 12
3. Grass-bag pin (2)
(Figure 12).
Side-Discharging the
Clippings
Use the side discharge for cutting very tall grass.
If the bag is on the machine, remove it before side-discharging
the clippings.
WARNING
The blade is sharp; contacting the blade can result
in serious personal injury.
Shut off the engine and wait for all moving parts to
stop before leaving the operating position.
Installing the Side-Discharge Chute
Lift up the side deflector and install the side-discharge chute
(Figure 13).
9
Figure 13