During Operation; During Operating Safety; Starting The Engine - Toro 22in Recyler Manual

Table of Contents

Advertisement

Available languages

Available languages

1. Raise the machine
Note: The cutting height settings are 25 mm (1 inch); 35 mm
(1-3/8 inches); 44 mm (1-3/4 inches); 54 mm (2-1/8 inches);
64 mm (2-1/2 inches); 73 mm (2-7/8 inches); 83 mm (3-1/4
inches); 92 mm (3-5/8 inches); and 102 mm (4 inches).

During Operation

During Operating Safety

General Safety
Wear appropriate clothing, including eye protection;
slip-resistant, substantial footwear; and hearing
protection. Tie back long hair, secure loose clothing, and
do not wear jewelry.
Do not operate the machine while ill, tired, or under the
influence of alcohol or drugs.
The blade is sharp; contacting the blade can result in
serious personal injury. Shut off the engine and wait for
all moving parts to stop before leaving the operating
position.
When you release the blade-control bar, the engine should
shut off and the blade should stop within 3 seconds. If
not, stop using your machine immediately and contact an
Authorized Service Dealer.
Operate the machine only in good visibility and
appropriate weather conditions. Do not operate the
machine when there is the risk of lighting.
Wet grass or leaves can cause serious injury if you slip and
contact the blade. Mow only in dry conditions.
Use extreme care when approaching blind corners,
shrubs, trees, or other objects that may block your view.
Watch for holes, ruts, bumps, rocks, or other hidden
objects. Uneven terrain could cause a slip-and-fall
accident.
Stop the machine and inspect the blades after striking an
object or if there is an abnormal vibration in the machine.
Make all necessary repairs before resuming operation.
Before leaving the operating position, shut off the engine,
remove the key (electric start only), and wait for all
moving parts to stop.
Figure 9
2. Lower the machine
If the engine has been running the muffler will be hot and
can severely burn you. Keep away from the hot muffler.
Check the grass catcher components and the discharge
guard frequently and replace them with the manufacturer's
recommended parts when necessary.
Use accessories and attachments approved by the The
Toro® Company only.
Slope Safety
Mow across the face of slopes; never up and down. Use
extreme caution when changing direction on slopes.
Do not mow on excessively steep slopes. Poor footing
could cause a slip-and-fall accident.
Do not mow near drop-offs, ditches, or embankments.
You could lose your footing or balance.

Starting the Engine

1. Hold the blade-control bar against the handle
10).
1. Blade-control bar
2. Pull the recoil-start handle lightly until you feel
resistance, then pull it sharply. Allow the rope to return
to the handle slowly
Note: If the machine does not start after several
attempts, contact an Authorized Service Dealer.
7
G017320
Figure 10
2. Recoil-start handle
(Figure
10).
(Figure

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents