Go To Location; Mission Planning - Impossible US-1 Operating Handbook

3. Set the new altitude with the slider. Confirm this altitude is
not below any obstacles.
4. Slide to confirm. The vehicle will change altitudes.

7.6.5 Go to Location

To automatically go to a location while flying:
1. In Fly view, press a location on the map.
2. Select 'Go to Location'. Remember, US-1 will not avoid obsta-
cles. Ensure there are no obstacles above the vehicle's current
altitude. Do not select 'Orbit Location'.
3. Slide to confirm.
4. If necessary, cycle the flight mode switch or move the sticks to
cancel the operation.

7.6.6 Mission Planning

To plan an advanced autonomous mission:
1. Enter the 'Plan' view from the menu dropdown.
2. Use the 'Waypoint' on the left to add waypoints to the planned
mission.
3. Use the 'Pattern' tool if advanced patterns are desired. Do not
use the 'structure scan' pattern.
4. When planning is complete, change to 'Fly' view and press the
action button.
5. After the mission has uploaded, drag the confirmation slider
to the right to start the mission.
Missions can be paused and resumed in progress via the 'Action'
button.
24