Table of Contents
Advertisement
> Insert the screw through the borehole and screw it into the slot nut.
> Tighten the screw, holding the Allen key by the long end.
Tightening the socket screws
> Always hold the Allen key by the long end when tightening the SN1, S1, S3, S4, S5, S8, and S11 screws.
2.3 Sequence of assembly steps
1. Working height adjustment. (see page 13)
2. Base frame assembly. (see page 15)
3. Rail support attachment. (see page 23)
4. Tabletop positioning. (see page 25)
5. Quilting frame levelling. (see page 26)
6. Track assembly. (see page 27)
7. Top and backing rail assembly. (see page 32)
8. Carriage and park position magnet alignment. (see page 35)
9. Machine preparation. (see page 38)
10.Take-up rail and dead bar attachment. (see page 53)
11.Leader, side clamp and storage tray attachment. (see page 55)
2.4 Working height adjustment
For optimal ergonomics and the best possible quilt quality, the height of the quilting frame can be adjusted.
To adjust the quilting frame to the optimal working height, the legs must be adjusted to the correct length
before assembling the frame.
Quilting frame assembly
13
Advertisement
Table of Contents
