Operations Before In-Line Service; Terminal Open Check - TEC MA-1595-1 Series Owner's Manual

2. OPERATIONS BEFORE IN-LINE SERVICE

2. OPERATIONS BEFORE IN-LINE SERVICE
Before entering in-line service operations (In-line Report takings, DLLs, etc.), the following operations are
available if necessary.

2.1 Terminal Open Check

This operation sends a dummy text to those terminals set in the TERMINAL CONNECTION TABLE, and prints
out the Register Nos. of the disconnected terminals (i.e. terminals not responding).
CONDITION
Any time outside a sale (operable on Master Terminal)
OPERATION
Mode Lock: X and IN-LINE Lamp illuminated
80 [AT/TL]
When the check result is normal:
Prints the Report Name only.
Master Terminal Receipt Print
Prints the Register Nos. of the terminals not
connected properly, as well as the Report Name.
2- 1
When any error status is found:
EO1-11152
2.1 Terminal Open Check