Timer Recording - Toshiba D-R3 Owner's Manual

00566A-D-R3_84~88 8/31/04 10:32 AM Page 86
Video
The disc revolves, but no image or bad quality
images are displayed.
Checkpoint 1
Checkpoint 2
Checkpoint 3
Sound
No sound.
Checkpoint 1
Checkpoint 2
Checkpoint 3
Checkpoint 4
No audio output.
Checkpoint 1
86
- English
Check whether there is damage to or
any foreign material on your disc.
Some low quality discs may not play
properly.
If scenes change from dark to bright
suddenly, the screen may shake
vertically temporarily, but this is not a
fault.
Are you watching a program in slow or
skip mode?
If you are playing a program at a speed
other than normal speed, sound will not
be heard.
Check the connections and settings.
Check whether the disc is damaged.
Clean the disc, if necessary.
Check whether the disc is inserted
correctly with the label facing up.
Check whether you have selected the
correct digital output options in the
Audio Output Options menu.
(See page 31.)

Timer Recording

Timer lamp flickers.
Check there is enough space in the
Checkpoint 1
disc for recording.
Check whether the current disc is
Checkpoint 2
recordable or not.
Make sure to check before the start
time of recording.
Timer recording does not work properly.
Re-check the recording time and the
Checkpoint 1
end time settings again.
Checkpoint 2 Recording will be cancelled, if the
power is disconnected due to a power
failure or another similar reason while
recording.