Setting Up The Nicam Options; Setting Up Scart Jack Options; Setting Up Nicam Options - Toshiba D-R3 Owner's Manual

Toshiba dvd recorder owner's manual d-r3
Hide thumbs Also See for D-R3:
Table of Contents

Advertisement

00566A-D-R3_14~35 8/31/04 10:28 AM Page 29

Setting Up NICAM Options

NICAM programmes are divided into 3 types. NICAM
Stereo, NICAM Mono and Bilingual (transmission in
another language). NICAM programmes are always
accompanied by a standard mono sound broadcast and
you can select the desired sound by setting NICAM on
or off.
1
With the unit in Stop mode, press the
MENU button on the remote.
Select "Setup" using †... buttons, then
2
press the √ or OK button.
DVD-RAM(VR)
Using the †... buttons, move the
3
selection bar to "System" then press √
or OK button to select.
DVD-RAM(VR)
Using the †... buttons, move the
4
selection bar to "NICAM" then press √
or OK button to select.
Using the †... and OK buttons, select
5
"On" or "Off".
• Off: Only set at this position to record the standard
mono sound during a NICAM broadcast if the stereo
sound is distorted due to inferior reception conditions.
• On: NICAM mode
Setup
System
√ √
Language
√ √
Audio
√ √
Video
√ √
Parental Control
√ √
MOVE
OK
RETURN
EXIT
System
Clock Set
√ √
Install
√ √
CM Skip Time
: 15 Sec
√ √
AV 1 Output
: Video
√ √
NICAM
: On
√ √
MOVE
OK
RETURN
EXIT
Setting Up Scart Jack
Options
If you connect external device (VCR/satellite receiver/
cable box) or TV to DVD Recoder with Scart
Jack(21pin), you need to set this options.
1
With the unit in Stop mode, press the
MENU button on the remote.
Select "Setup" using †... buttons, then
2
press the √ or OK button.
Using the †... buttons, move the
3
selection bar to "System" then press √
or OK button to select.
DVD-RAM(VR)
System
Language
Audio
Video
Parental Control
MOVE
OK
RETURN
Using the †... buttons, move the
4
selection bar to "AV1 Output" then press
√ or OK button to select.
DVD-RAM(VR)
Clock Set
Install
CM Skip Time
AV 1 Output
NICAM
MOVE
OK
RETURN
Using the †... and OK buttons, select
5
"Video" or "RGB" to suit the AV terminal
of TV.
• AV2 input option will be set automatically according to
the signal of external device (VCR/satellite
receiver/cable box).
Setup
√ √
√ √
√ √
√ √
√ √
EXIT
System
√ √
√ √
: 15 Sec
√ √
: Video
√ √
: On
√ √
EXIT
29
English -

Advertisement

Table of Contents
loading

Table of Contents