Disable; Software Update; Current Version; Disc Update - Toshiba BDX2000KU Owner's Manual

• BD-Live Setting
You can limit the Internet access from the BD-Live
functions. (The default setting is "Allow".)
1
Follow steps 1 to 4 in "Connection Test" on
page 46.
Use [K / L] to select "Enable(Custom)", then
2
press [ENTER].
Use [K / L] to select "BD-Live Setting", then
3
press [ENTER].
Use [K / L] to select the desired setting, then
4
press [ENTER].
"Allow":
Internet access is permitted from all BD-Live contents.
"Limited Allow":
Internet access is permitted only for BD-Live contents
which have content owner certificates. Internet access
without the certificates are prohibited.
"Prohibit":
Internet access is prohibited from all BD-Live contents.
5
Press [RETURN] to go back to the previous
screen, or press [SETUP] to exit.

Disable

Deactivate all the network connection and settings.
1
Follow steps 1 to 4 in "Connection Test" on
page 46.
Use [K / L] to select "Disable", then press
2
[ENTER].
3
Press [RETURN] to go back to the previous
screen, or press [SETUP] to exit.
Note
• The network connection can be reactivated by
setting the network connection to "Enable(Easy)" or
"Enable(Custom)".

Software Update

Current Version

You can confirm the current software version.
1
Follow steps 1 to 3 in "Connection Test" on
page 46.
Use [K / L] to select "Software Update", then
2
press [ENTER].
EN
FUNCTION SETUP
Use [K / L] to select "Current Version", then
3
press [ENTER].
4
Press [ENTER] or [RETURN] to exit.
Note
• Please visit http://www.tacp.com to download the
latest firmware version.

Disc Update

You can upgrade the software by using disc.
1
Follow steps 1 to 3 in "Connection Test" on
page 46.
Use [K / L] to select "Software Update", then
2
press [ENTER].
Use [K / L] to select "Disc Update", then press
3
[ENTER].
Use [K / L] to select "Yes", then press [ENTER].
4
5
Disc tray will open automatically.
• Insert the disc for software update and then press
[OPEN/CLOSE A].
6
After completing loading disc, confirmation
message will appear. Select "Yes" and press
[ENTER] to start upgrading.
• It may take awhile to complete the updating. (Please
wait until "100%" appears on the front panel display.)
7
After the disc upgrade finishes, this unit will
restart and eject the disc.
Note
• You can check the current firmware version in
"Current Version" in "Software Update" menu.
• Please do not unplug the AC power cord while
executing the "Disc Update".
• All settings will remain the same even if you update
the firmware version.
Others
Current Version
Current Version x.xxx
If you wish to check latest update
or other product information,
please check our Website.
www.tacp.com
49