Toshiba BDX2000KU Owner's Manual page 48

3-a) Use [K / L] to select "Proxy Address", then press
[ENTER]. Proxy address setting screen will appear.
Enter proxy address.
• The keyboard screen will appear.
Others
Proxy Address
1 2
a b
k l
u v
Clear
[K / L / s / B] : Move the highlight.
[Number buttons] : Enter number.
[ENTER] : Enter the highlighted number/word.
[RED] : Clear the entered number or word.
[GREEN] : Clear all the entered numbers or words.
[BLUE] : Switch between abc ? ABC ? @!?
[YELLOW] : Set the entered number or word.
3-b) After you enter proxy address correctly, press
[YELLOW].
• Confirmation message will appear. Select "Yes"
to complete the settings.
Others
Proxy Address
Is Setting OK?
xxxxx
No
Yes
3-c) Use [K / L] to select "Proxy Port" , then press
[ENTER]. Proxy port setting screen will appear.
Enter proxy port number with number buttons.
Others
Proxy Port
Please select the input Proxy Port.
then press 'ENTER'
3-d) After you enter proxy port correctly, press
[ENTER].
48
FUNCTION SETUP
3 4 5 6 7 8 9 0
c d e f g h i j
m n o p q r s t
w x y z . - _
OK
All Clear a/A/@ OK
xxxxx
4
Press [RETURN] to go back to the previous
screen, or press [SETUP] to exit.
Note
• The range of input number for the port number is
between 0 and 65535. (If you enter a number larger
than 65535, it will be regarded as 65535.)
• For proxy port, the selected ports may be blocked
and not be able to use depending on your network
environment.
• Connection Speed
You can set connection speed as your preference. (The
default setting is "Auto".)
1
Follow steps 1 to 4 in "Connection Test" on
page 46.
Use [K / L] to select "Enable(Custom)", then
2
press [ENTER].
Use [K / L] to select "Connection Speed", then
3
press [ENTER].
Use [K / L] to select the desired setting, then
4
press [ENTER].
"Auto":
Set the appropriate connection speed automatically, in
accordance with your network environment.
"10BASE Half":
Set the connection speed to "10BASE Half".
"10BASE Full":
Set the connection speed to "10BASE Full".
"100BASE Half":
Set the connection speed to "100BASE Half".
"100BASE Full":
Set the connection speed to "100BASE Full".
5
Press [RETURN] to go back to the previous
screen, or press [SETUP] to exit.
Note
• Choose a connection speed in accordance with your
network environment.
• The network connection may be disabled depending
on the device, when the settings are changed.
EN