Toshiba BDX2000KU Owner's Manual page 47

If you select "Manual", follow the following
instruction to set the IP address and DNS.
3-a) Use [K / L] to select "IP Address", "Subnet Mask"
or "Default Gateway", then press [ENTER]. IP
address setting screen will appear. Enter IP
address, subnet mask and default gateway with
cursor buttons and number buttons.
Others
IP Address Setting
IP Address
Subnet Mask
Default Gateway
then press 'ENTER'
• Enter the IP address number after checking the
specifications of your router.
• If the IP address number is unknown, check the
IP address number of other devices (e.g. PC
connected via LAN cable) and assign a different
number from those of other devices.
3-b) After you enter all correctly, press [ENTER].
• Confirmation message will appear. Select "Yes"
to complete the settings.
Others
IP Address Setting
Is Setting OK?
IP Address
Subnet Mask
Default Gateway
No
Yes
3-c) Use [K / L] to select "Primary DNS" or "Secondary
DNS", then press [ENTER]. DNS setting screen will
appear. Enter primary DNS and secondary DNS
with cursor buttons and number buttons.
Others
DNS Setting
Primary DNS
Secondary DNS
then press 'ENTER'
• Enter the numbers instructed by your Internet
provider.
• If the number is unknown, check the number of
other devices (e.g. PC connected via LAN cable)
and assign the same number.
EN
FUNCTION SETUP
xxx . xxx . xxx . xxx
xxx . xxx . xxx . xxx
xxx . xxx . xxx . xxx
xxx . xxx . xxx . xxx
xxx . xxx . xxx . xxx
xxx . xxx . xxx . xxx
xxx . xxx . xxx . xxx
xxx . xxx . xxx . xxx
3-d) After you enter all correctly, press [ENTER].
• Confirmation message will appear. Select "Yes"
to complete the settings.
Others
DNS Setting
Is Setting OK?
Primary DNS
Secondary DNS
No
Yes
4
Press [RETURN] to go back to the previous
screen, or press [SETUP] to exit.
Note
• The range of input number is between 0 and 255.
• If you enter a number larger than 255, the number
will automatically be 255.
• The manually entered number will be saved even if
you change the setting to "Auto(DHCP)".
• When you enter a wrong number, press [CLEAR] to
cancel. (The number will be back to "0".)
• If you want to enter 1 or 2 digit number in one cell,
press [B] to move on to the next cell.
• If the entered IP address or the default gateway or
primary DNS number is same as the default setting,
IP address setting will be set to "Auto(DHCP)". (The
manually entered number will be saved.)
• When IP address setting is set to "Manual", the
setting of DNS setting will automatically be "Manual"
and when IP address setting is set to "Auto(DHCP)",
you can set either "Auto(DHCP)" or "Manual" for DNS
setting.
• Proxy Setting
1
Follow steps 1 to 4 in "Connection Test" on
page 46.
Use [K / L] to select "Enable(Custom)", then
2
press [ENTER].
Use [K / L] to select "Proxy Setting", then
3
press [ENTER] repeatedly to select the desired
setting.
• For default settings, select "Do Not Use".
• If you need to change the proxy setting as instructed
by your Internet service provider to set the
designated proxy address and port, select "Use".
If you select "Use", follow the following instructions
to set the proxy address and proxy port.
xxx . xxx . xxx . xxx
xxx . xxx . xxx . xxx
47