Advertisement
5. Install the glass door seal bracket with the three (3)
Phillips pan head screws that were on the top of the
inner firebox. Figure 3.
NOTE: Before proceeding, ensure the glass on the outdoor
side of the fireplace is cleaned thoroughly.
6. Install the glass door by aligning the fingers at the top
of the door frame with the slots inside the glass door
seal bracket, and slide into place at an angle. After
fingers are fully engaged, rest the glass door against
the bottom of the firebox to align the three mounting
holes. Use the supplied screws to secure in place. See
Figure 4.
Remove
screws
Remove screws
Figure 2. Remove the black face from the unit
Glass door
seal bracket
Glass door
Figure 3. Install glass door and face caps
2
7. Affix the outdoor kit to the top and sides of the unit using
8. Carefully return fireplace to upright position.
9. Install installation brackets. Installation brackets can be
Remove screws
Remove screws
Glass door screws
Figure 4. Glass door and face caps installed
Face caps
Face cap
Screw installation
Figure 5. Face attached to caps
supplied #8 stainless steel screws.
positioned to accommodate the thickness of the outer
wall sheathing. Figure 6.
Installation brackets
20308722
Advertisement
