Lexus RC300h Manual page 30

15. REMOVE REAR SEAT CUSHION ASSEMBLY
Caution:
Wear protective gloves. Sharp areas on the seat
frame may injure your hands.
(1) Lift up the front edge of the rear seat cushion
assembly as shown in the illustration and disengage
the rear seat cushion frame hook on the front side of
the rear seat cushion assembly from the rear seat
cushion lock hook.
Notice:
Be sure to hold the part of the rear seat cushion
assembly directly next to the rear seat cushion lock
hooks when lifting it up. Lifting a different part of the
rear seat cushion assembly may deform the rear seat
cushion frame.
Hint:
Use the same procedure for the RH side and LH side.
Standard Measurement:
Area
A
B
(2) Disengage the 2 rear seat cushion frame hooks on the
rear side of the rear seat cushion assembly from the
2 child restraint seat anchor bracket hooks.
(3) Pass the 2 rear seat inner belt assemblies through the
rear seat cushion assembly and remove the rear seat
cushion assembly.
16. REMOVE REAR SEAT CUSHION LOCK HOOK
(1) Disengage the 2 claws to remove the rear seat
cushion lock hook as shown in the illustration.
Hint:
Use the same procedure for the RH side and LH side.
17. REMOVE REAR SEAT HEADREST ASSEMBLY
(1) Remove the 2 rear seat headrest assemblies.
Measurement
100 mm (3.94 in.) or less
121.1 mm (4.77 in.)
26
Frame Hook
B
A
Bracket Hook
B
Frame
Hook