Siemens SIMATIC ET 200SP Manual page 20

Switching capacity of outputs
With resistive load, max.
With lamp load, max.
Output voltage
for signal "1", min.
Output current
for signal "1" rated value
for signal "1" permissible range, min.
For signal "1" permitted range, max.
for signal "0" residual current, max.
Output delay with resistive load
"0" to "1", max.
"1" to "0", max.
Parallel switching of 2 outputs
For logical operations
For increased performance
For redundant control of a load
Switching frequency
With resistive load, max.
With inductive load, max.
With lamp load, max.
Total current of the outputs
Max. current per channel
Max. current per module
Total current of the outputs (per module)
Horizontal installation
•
•
•
Vertical installation
•
•
•
Output current per channel
Horizontal installation
•
Vertical installation
•
Triac outputs
Size of motor starter according to NEMA, max.
DQ 4x24..230VAC/2A ST digital output module (6ES7132-6FD00-0BB1)
Manual, 02/2014, A5E32043575-AA
up to 40 °C, max.
up to 50 °C, max.
up to 60 °C, max.
up to 30 °C, max.
up to 40 °C, max.
up to 50 °C, max.
up to 60 °C, max.
up to 50 °C, max.
Technical specifications
6.1 Technical specifications
6ES7132-6FD00-0BB1
2 A
100 W
20.4 V
2 A
10 mA
2 A
460 µA
10 ms
10 ms
No
No
Yes
10 Hz
0.5 Hz
1 Hz
2 A
8 A
8 A
6 A
4 A
8 A
6 A
4 A
2 A
2 A
5
19