Subscribe to Our Youtube Channel
Related Manuals for Global Specialties 1415
Summary of Contents for Global Specialties 1415
- Page 1 1415 Dual Output DC Power Supply User Manual Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 TestEquipmentDepot.com...
- Page 2 • Make all connections to the instrument before applying power. • Do not operate the instrument in ways not specified by this manual or by Global Specialties Electrical Power This instrument is intended to be powered from a CATEGORY II mains power environment.
- Page 3 grounded through the ground conductor of the supplied, three- conductor AC line power cable. The power cable must be plugged into an approved three-conductor electrical outlet. The power jack and mating plug of the power cable meet IEC safety standards. WARNING Do not alter or defeat the ground connection.
- Page 4 Global Specialties for repair. Notify Global Specialties of the nature of any contamination of the instrument. Clean the instrument only as instructed...
- Page 5 Do not touch live circuits WARNING Instrument covers must not be removed by operating personnel. Component replacement and internal adjustments must be made by qualified service-trained maintenance personnel who are aware of the hazards involved when the instrument's covers and shields are removed.
- Page 6 Servicing CAUTION Do not substitute parts that are not approved by Global Specialties or modify this instrument. Return the instrument to Global Specialties for service and repair to ensure that safety and performance features are maintained. Cooling fans CAUTION This instrument contains one or more cooling fans. For continued...
- Page 7 Please utilize your local WEEE collection facilities in the disposition of this product and otherwise observe all applicable requirements. The 1415 is CE compliant. Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 TestEquipmentDepot.com...
-
Page 8: Table Of Contents
Table of Contents 1 General Information ..............8 1.1 Product Overview 1.2 Features 1.3 Constant Voltage (CV) /Constant Current (CC) Mode 1.4 Package Contents 1.5 Front Panel Overview 1.6 Rear Panel 2 Getting Started ................. 12 2.1 Input Power and Fuse Requirements 2.2 Fuse Requirements 2.3 Line Voltage Selection 2.3.1... -
Page 9: General Information
General Information 1.1 Product Overview Global Specialties Model 1415 Dual Output DC Power Supply provides one variable output (0 – 30 V / 0 – 3 A) and one fixed output (5 V / 3 A). The variable output features both constant current &... -
Page 10: Package Contents
Report any damage to the shipping agent immediately. Save the original packing carton for possible future reshipment. The 1415 power supply is shipped with the following contents: 1415 Power Supply • AC Power Cord •... -
Page 11: Front Panel Overview
1.5 Front Panel Overview Figure 2: Front Panel Power switch Negative output terminal of the fixed 5V/3A output (black) Positive output terminal of the fixed 5V/3A output (red) Overload indicator LED for the fixed 5V/3A output Negative output terminal of the variable output Ground terminal of the variable output Positive output terminal of the variable output CC mode LED to indicate constant current... -
Page 12: Rear Panel
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 TestEquipmentDepot.com Figure 3: Front Panel Diagram 1.6 Rear Panel A. Heat sink: Heat dissipation for power transistor B. Ventilation Fan: 8" 24 VDC fan C. Power input socket D. -
Page 13: Getting Started
Getting Started 2.1 Input Power and Fuse Requirements The supply has a selectable AC input that accepts line voltage input within: Voltage: 115 V or 230 V (±10%) • Frequency: 47 Hz – 63 Hz • Before connecting to an AC outlet or external power source, be sure that the power switch is in the OFF position and verify that the AC power cord, including the extension line, is compatible with the rated voltage/current and that there is sufficient circuit capacity for the... -
Page 14: Line Voltage Selection
2.3 Line Voltage Selection The power supplies can be selected to operate with 110 V input or 220 V input. To ensure that your instrument is properly configured to operate at the desired AC line voltage, please follow the steps below. -
Page 15: Ventilation
CAUTION Do not connect power to the instrument until the line voltage selection is setup correctly. Applying an incorrect line voltage or configuring the line voltage selection improperly may damage the instrument and void all warranty. 2.4 Ventilation CAUTION Also make sure the ventilation holes are not blocked. Ensure the ventilation fan is working well (it should turn on at power-on). -
Page 16: System Configuration
3.2 System Configuration Model 1415 can be operated alone or connected to two or more other units in series to obtain a higher voltage rating (maximum 240 V), or in parallel to obtain a higher current rating (maximum 24 A). -
Page 17: Multiple Units In Parallel
3.2.4 Multiple Units in Parallel Adjust all units to the same output voltage. Make the parallel connection of the positive and the negative terminals of units 1 and 2. Repeat for units 2 and 3, and so forth, if needed. Connect the load between the positive and negative terminals of the last unit. -
Page 18: Specifications
Specifications All specifications apply to the unit after a temperature stabilization time of 15 minutes over an ambient temperature range of 25 °C ± 5 °C. 1415 Dual Output DC Power Supply Output Parameters Max Output Power 105 W Number of Outputs 2 independent &... -
Page 19: Maintenance
Maintenance 5.1 Preventative Steps Please follow these preventive steps to ensure the proper operation of your instrument. Never place heavy objects on the instrument. • Never place a hot soldering iron on or near the instrument. • Never insert wires, pins, or other metal objects into •... -
Page 20: Service And Warranty Information
Service and Warranty Information 6.1 Limited One-Year Warranty Cal Test Electronics warrants this product to be free from defective material or workmanship for a period of 1 year from the date of original purchase. Under this warranty, Cal Test Electronics is limited to repairing the defective device when returned to the factory, shipping charges prepaid, within the warranty period. - Page 21 ©2015 Cal Test Electronics...
- Page 22 This page intentionally left blank.
- Page 23 This page intentionally left blank.
- Page 24 20150603...
Need help?
Do you have a question about the 1415 and is the answer not in the manual?
Questions and answers