Table of Contents
Advertisement
2.1.1. LOGO backlight
The multi-colour backlight provides information on the current status of the 60GHz
transmission and is also used as battery status display*.
QuickPresent air
Nr. System status
1
Permanent white
2
Slowly flashes white (approx. 1sec)
3
Rapidly flashes white (approx.
1/5sec)
4
Dark / shortly flashes green
5
Permanent red*
6
Slowly flashes red*
7
Shortly flashes blue,
then flashes white
Remark:
No. 5 + 6 only apply to battery operation*.
Minimum recommendable charging time is approx. 4 hours.
The charging status is calculated from the operating time and the operating status of the wireless transmitter.
Attention:
In this context, only discharge is calculated! The actual charging status is not recorded.
Therefore, the device assumes with every charging cycle that the battery is full and calculates its discharge during use.
* The scope of supply for QuickPresent Air Lite does not include batteries
Description
Normal operating condition, 60GHz transmitter and receiver are connected and
have established a video/audio connection.
60GHz transmitter is not connected or is switched off,
e.g. due to the missing video signal at the selected input.
60GHz transmitter is being connected.
STANDBY mode or switched off.
Battery status < 30%, remaining operating time approximately 1.5 hours
(depending on type of use).
Batteries are almost empty / must be charged soon.
The touch-sensitive button of the logo has been actuated:
the 60GHz transmitter is searching for new receivers.
7
Advertisement
Table of Contents
