Symbols Used In This Manual; Symbols On The Power Tool; Important Safety Information - Flex DD 4G 18.0-EC Manual

Contents
Symbols used in this manual . . . . . . . . . 16
Symbols on the power tool . . . . . . . . . . 16
Important safety information . . . . . . . . . 16
Noise and vibration . . . . . . . . . . . . . . . . 18
Technical data . . . . . . . . . . . . . . . . . . . . 19
Overview . . . . . . . . . . . . . . . . . . . . . . . . 20
Instructions for use . . . . . . . . . . . . . . . . 21
Maintenance and care . . . . . . . . . . . . . . 26
Transport . . . . . . . . . . . . . . . . . . . . . . . . 27
conformity . . . . . . . . . . . . . . . . . . . . 27
Disposal information . . . . . . . . . . . . . . . 27
Exemption from liability . . . . . . . . . . . . . 27

Symbols used in this manual

WARNING!
Denotes impending danger. Non-
observance of this warning may result in
death or extremely severe injuries.
CAUTION!
Denotes a potentially dangerous situation.
Non-observance of this warning may result
in injury or damage to property.
NOTE
Denotes application tips and important
information.

Symbols on the power tool

Before switching on the power tool
for the first time, read the
operating manual.
Wear protective goggles.
Short-circuit-proof safety
transformer.
Protect the battery against heat,
including prolonged sunshine, and
fire. Explosion hazard!.
Do not throw the battery into a fire.
Explosion hazard!
16
The tool is only suitable for use
indoors. Do not expose the tool to
rain. Store power tools and
batteries in dry rooms.
Disposal information
(see page 27).

Important safety information

WARNING!
Read all safety warnings, instructions, illu-
strations and specifications provided with
this power tool. Failure to follow all instruc-
tions listed below may result in electric
shock, fire and/or serious injury. Save all
warnings and instructions for future
reference.
Before using the power tool, please read the
following and act accordingly:
these operating instructions,
-
the "General safety instructions" on the
-
handling of power tools in the enclosed
booklet (leaflet no.: 315.915),
the currently valid site rules and the
-
regulations for the prevention of accidents.
This power tool is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged.
The power tool may be operated only if it is
for its intended use,
-
in perfect working order.
-
Faults which compromise safety must be
repaired immediately.
Intended use
The DD 4G 18.0-EC cordless drill driver is
intended
- for commercial use in industry and trade,
- for inserting and releasing screws,
- for drilling in wood, metal, ceramic and
plastic.
DD 4G 18.0-EC