Scan - Toshiba e-studio 4520c Series Operator's Manual

2.GA-1211/GA-1310 SPECIFIC FUNCTIONS

SCAN

When you press the [SCAN] button on the control panel, the SCAN screen is displayed on the touch panel.
The following two buttons are different from those of e-STUDIO4520C series/e-STUDIO6530C series:
2
1. [USB]
This button is used to save scanned images as PDF, XPS, TIFF, or JPEG files in a USB storage device.
To learn more about Scan to USB, see the following section:
P.21 "Scan to USB"
2. [SMB/FTP/OTHER]
This button allows you to use the GA-1211/GA-1310 specific scan functions.
To learn more about them, see the following section:
P.25 "Scan to SMB/FTP/OTHER"
For instructions on how to perform Scan to e-Filing and Scan to E-mail, refer to the Scanning Guide.
Scan to USB
The Scan to USB function sends and stores scans to a USB storage device.
To store data in a USB storage device, the Save to USB Media setting must be enabled by the administrator. For
details, refer to the TopAccess Guide.
The USB storage device must meet the following requirements:
- FAT16 or FAT32 format
- Single-partition (USB media with multiple partitions are not supported.)
However, some of the devices may not be used in this equipment, even though these requirements have been met.
1
Operations from the Control Panel
2 GA-1211/GA-1310 SPECIFIC FUNCTIONS
21