Brose E 41230 User Manual page 14

EN | 32
› Note: All trip information values are reset
to zero.
› Note: Reset cannot be called up while
cycling.
Settings
Settings
Language
(1)
Screens
Display
(3)
System
Information
(5)
BACK
Fig. 7: Setting menu
You can access the settings via the menu
Settings item.
Using the «Increase» and «Decrease» keys,
you can call up further submenus and open
them with the «Menu» key.
From the settings menu, you can scroll back to
the menu with the «Walk assist» key.
In the settings menu you will find the following
setting options:
(1) Languages: The selection of a language
causes an immediate change of the
language presentation.
(2) Screen: Personalisation of the Trip
Information display (Fig.1-5). Switch
between the data you want to display
while riding:
» Range
» Trip (route)
» Time (trip time)
Operation and Control | Brose Display Allround
» Average speed
» Maximum speed
» Total distance
(3) Display: Ajustment of the display
» «Automatic» Automatic control of the
display brightness as well as the day
and night cycling display («White/
Black»).
» «Brightness» Control of the display
(2)
brightness; this can only be changed if
the automatic control is deactivated.
» «White/Black» Change between white
(4)
and black background.
» «Stealth Mode» The backlight of the
display will turn off after 5 seconds
of inactivity. All e-bike and display
functions remain active. Press any key
to turn on the backlight.
(4) System: Refer to the System Settings
chapter
(5) Information: Displays information about
your Brose Drive System (e.g.: Product
name & software version)
System Settings
Navigate to the «System» sub-point.
You can use the «Increase» (Fig. A-d) and
«Decrease» (Fig. A-e) keys to select the
required setting and open it and, if necessary,
further submenus using the «Menu» key (Fig.
A-b). From the respective point, you can return
to the previous menu by pressing the «Walk
assist» key (Fig. A-f). Alternatively, call up the
last menu item with «Back».
› Note: Please note that not every Brose
Drive System features a «clock» Module.
Therefore some options can´t be seen in
your e-Bike Display.