Keep the operating instructions at hand for further use. If you pass on the Brose components to third parties, please always include the respective user manual. 1. Safety Advice Read the user manual carefully ›...
Page 5
(e.g. due to overload). immediate vicinity cannot be completely ruled out. Do not use the control unit with › Do not make any changes to your Brose Bluetooth® near medical devices, petrol Drive System. Never try to increase the stations, chemical plants, explosive areas, performance of your Brose Drive System.
The «Allround» display and control unit of the In addition to the functions shown here, it may be Brose Drive System is intended exclusively for that software changes for troubleshooting and use in this system. It serves to display ride- enhanced functions are introduced at any time.
Page 7
Brose Display Allround | Product Description 25 | EN 3.2. Explanation of Illustrations 3.3. Technical Data Allround display and control unit Brose material no. E41230 L × W × H 44 × 37 × 50 mm Weight, approx. 50 g...
(e.g. brake grips) is always ensured. NOTE: Brose recommends positioning on the left side of the handlebar. › Make sure that the connection cable is not crushed or bent.
Page 9
You can go back one level at any time using The display unit activates automatically. the «Walk assist» key (Fig. A-f). Changed › The Brose Drive System is now ready to settings are saved. operate. NOTE: The menu and the settings menu cannot be accessed while riding.
«On/Off» deactivated («OFF»). key, see battery/bicycle manufacturer‘s NOTE: Always turn off the Brose Drive System manual). system takes about when you stop the e-bike.
Page 11
Brose Display Allround | Operation and Control 29 | EN Use the «Increase» and «Decrease» keys to increase or decrease the assist level. If, for example, you are in the settings menu, you can use these keys to scroll up or down.
Page 12
EN | 30 Operation and Control | Brose Display Allround To increase the level of assistance, press the «Increase key» (Fig. A-d) on the control panel until the desired level of assistance appears on the display; to decrease, press the «Decrease key» (Fig.
Brose Display Allround | Operation and Control 31 | EN NOTE: The Walk assist function may only be The Menu and settings menu cannot be called used when pushing the e-bike. If the e-bike up whilst cycling. A menu in the Brose «Allround» display/ wheels have no contact with the ground when using the Walk assist, there is a risk of injury.
Page 14
(Fig. A-f). Alternatively, call up the Information display (Fig.1-5). Switch between the data you want to display last menu item with «Back». › Note: Please note that not every Brose while riding: » Range Drive System features a «clock» Module.
Page 15
Brose Display Allround | Operation and Control 33 | EN » The minute display flashes. Set the System required minute using the «Increase» and «Decrease» keys. Confirm your Light entry with the «Menu» key. Unit Format » Exit the menu with the help of the «Walk Time Format assist»...
Troubleshooting | Brose Display Allround 6. Troubleshooting › The fault display may indicate serious WARNING! errors in your Brose Drive system. Errors Always observe all error information! prevent the safe operation of the e-bike. NOTE: Have repairs done by a There is a risk of accidents involving certified bicycle dealer only.
Page 17
Brose Display Allround | Troubleshooting 35 | EN If you experience any problems using your Brose Drive System, first check the items listed in the following table. In many cases, you can already remedy this yourself. Symptom Possible cause Solution...
7.2. Customer Service and Advice on Use The battery may only be shipped with dangerous goods packaging and the necessary For all questions about the Brose Drive warnings. System and its components, please contact an If you have questions about transportation, authorised bicycle dealer.
Page 19
Brose Display Allround 7.5. Disposal If Brose accepts a warranty claim, this in no case implies the assumption of liability for Drive unit, display/control unit, battery, speed possible damages. In the event of disputes sensor, accessories and packaging should be regarding the (correlative) damages suffered, recycled in an environmentally friendly way.
Page 20
Brose Antriebstechnik GmbH und Co. Kommanditgesellschaft, Berlin Sickingenstr. 29-38 10553 Berlin Deutschland Telefon: +49 30 343498 100 service.ebike@brose.com www.brose-ebike.com V 1.1 · 08/19 · de...