Brose E 41230 User Manual page 12

EN | 30
Fig. 4: Battery Charging
Assistance level
Your Brose Drive System has four assistance
levels. While riding, you will see the level as a
coloured bar (Fig.1-4). The characteristics of
the respective assistance mode can be found
in the following table:
Assistance levels
(grey): No motor assistance. At
OFF the same time resistance-free
cycling.
(green): Noticeable motor
ECO assistance for maximum
efficiency and range.
(blue): Very noticeable motor
TOUR assistance, ideal for lengthy
tours.
(yellow): Powerful assistance for
SPORT
sport cycling
(red): Full assistance for sport
BOOST/ cycling, on hilly routes and in
BOOST FX city traffic with normal battery
range
You can use the control unit to adjust how much
the e-bike drive assists you when pedalling. The
assistance level can be changed at any time, even
while riding.
75 %
Operation and Control | Brose Display Allround
To increase the level of assistance, press the
«Increase key» (Fig. A-d) on the control panel until
the desired level of assistance appears on the
display; to decrease, press the «Decrease key» (Fig.
A-e).
For 2 seconds you will see the selected assistance
level in the ride information area (Fig. 1-5), also as
text.
Walk Assist
The Walk assist key (Fig. A-6) helps you to
push your e-bike.
It is activated as follows:
Press and hold the «Walk assist» key (Fig.
A-f). The e-bike accelerates without pedal
assistance to a speed between 3 and 6 km/h
specified by the bicycle manufacturer.
The trip information display (Fig.1-5) will show
you when Walk assist is activated.
Release the Walk assist key to deactivate the
Walk assist.
The Walk assist is switched off as soon as one
of the following occurs:
› You release the «Walk assist» key,
› the e-bike wheels are blocked (e.g. due to
braking or hitting an obstacle),
› the speed exceeds 6 km/h.
Fig. 5: Walk Assist (activ)
3
5
kmh
WALK