Electromagnetic Fields (Emf) - Philips QT4000 Manual

8
English

Electromagnetic fields (EMF)

General
Charging
- Never use compressed air, scouring pads,
abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the
appliance.
- Do not use the supply unit in or near wall
sockets that contain an electric air freshener to
prevent irreparable damage to the supply unit.
This Philips appliance complies with all applicable
standards and regulations regarding exposure to
electromagnetic fields.
- The supply unit is suitable for mains voltages
ranging from 100 to 240 volts.
- The supply unit transforms 100-240 volts to a
safe low voltage of less than 24 volts.
Charge the appliance fully before you use it for the
first time and after a long period of disuse.
Charging takes approx. as follows: 10 hours
(QT4000, QT4001 only), 8 hours (QT4003 only) or 1
hour (QT4009 only). When the appliance is fully
charged, the appliance has a cordless operating
time of up to: 35 minutes (QT4003 only), 45
minutes (QT4000, QT4001 only) or 60 minutes
(QT4009 only).
Note: This appliance can only be used without
cord. Make sure the appliance is charged before
use.
1 Make sure the appliance is switched off.