Milwaukee M12 FUEL ONEFTR12 Operator's Manual

Milwaukee M12 FUEL ONEFTR12 Operator's Manual

Digital torque wrenches with one-key

Advertisement

OPERATOR'S MANUAL
Cat. No.
M12 ONEFTR12, M12 ONEFTR38
M12 FUEL™ DIGITAL TORQUE WRENCHES WITH ONE-KEY™
WARNING
To reduce the risk of injury, user must read and understand operator's manual.

Advertisement

Table of Contents

Troubleshooting

loading

Summary of Contents for Milwaukee M12 FUEL ONEFTR12

  • Page 1 OPERATOR'S MANUAL Cat. No. M12 ONEFTR12, M12 ONEFTR38 M12 FUEL™ DIGITAL TORQUE WRENCHES WITH ONE-KEY™ WARNING To reduce the risk of injury, user must read and understand operator's manual.
  • Page 2: General Power Tool Safety Warnings

    GENERAL POWER TOOL • Do not overreach. Keep proper footing and balance at all times. This enables better control of the power SAFETY WARNINGS tool in unexpected situations. Read all safety warnings, instruc- WARNING • Dress properly. Do not wear loose clothing or tions, illustrations and specifica- jewelry.
  • Page 3: Functional Description

    Milwaukee Tool or a trained •Do not expose a battery pack or tool to fire or exces- professional for additional information or training.
  • Page 4: Specifications

    SYMBOLOGY 1. Use only appropriate Square Drive Sockets. 2. To attach a socket or other accessory, align the Volts accessory with the drive anvil and push it firmly onto the tool. Direct Current 3. To remove the accessory, pull the accessory off the drive anvil.
  • Page 5: Operation

    OPERATION Starting, Stopping and Controlling Speed These tools may be operated at any speed from Always remove battery pack before WARNING 0 to full RPM. changing or removing accesso- 1. To start the tool, pull the paddle switch. NOTE: A ries.
  • Page 6: Troubleshooting

    Contact button is Turn tool OFF and Firmware Issue a MILWAUKEE® service facility for ALL repairs. pressed. remove battery Maintaining Tool Return to a service Keep your tool, battery pack and charger in good centre to be repair by adopting a regular maintenance program.
  • Page 7 NOTE: Once tool has exceeded 5,000 cycles, the tool will be out of certification and will expire after 14 days. Contact your local Milwaukee Tool service centre if the tool is overloaded. Refer to the troubleshooting section within the manual for more information.
  • Page 8 Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...

This manual is also suitable for:

M12 fuel oneftr38M12 fuel series

Table of Contents