Rear Panel Connections - Topfield TF 6000 PVR User Manual

2.3 Rear panel connections

• Do not expose the digital receiver to any moisture. The
digital receiver is designed for use indoors only. Use dry
cloth when cleaning the digital receiver.
• Place the digital receiver on a firm and level surface.
• Do not place the digital receiver close to heat emitting
units or in direct sunlight, as this will impair cooling.
Do not lay any objects such as magazines on the digital
receiver. When placed in a cabinet, make sure there is
a minimum space of 10 centimeters around it. For the
physical specification of the digital receiver, refer to Ta-
ble 2.2.
• Protect the power cord from being walked on or pinched.
If wires are exposed or cord is damaged, do not use the
receiver and get cord replaced.
• Never open the digital receiver casing under any cir-
cumstances. Warranty will be void.
• Refer all servicing to an electronics qualified service tech-
nician.
Table 2.1: Power specification
Input voltage
Power consumption
Table 2.2: Physical specification
Size
Weight
Operating temperature
Storage relative humidity
The TF 6000 PVR has a wide range of connections on the back
panel.
2.3 Rear panel connections 9
90 to 250 V AC, 50/60 Hz
45 W at maximum in operation
8 W in standby
430 60 265 mm
4.3 kg
0 to 45 °C
5 to 95 %