Table of Contents
Advertisement
3.5 Adjusting the on-screen display
3.6 To use the time shift feature
To change the number, select the Change PIN Code menu;
then an input box appears. You have to enter a desired num-
ber twice for confirmation.
You can also restrict uses of some menus. Selecting the Access
Control menu displays a list of menus that you can lock. If the
Time Setting item is set to Locked, you have to enter the per-
sonal identification number to access the Time Setting menu.
If you enter a wrong number, you cannot use the menu. To
release a shut item, set it to Unlocked.
You can adjust the transparency level of the on-screen display.
Select the System Setting menu and set the OSD Transparency
option as you desire. Its available range is 0 to 50 percent.
You can adjust the display time of the information box. Refer
the information box to § 5.2.2. To adjust its display time, select
the System Setting menu and set the Info Box Display Time
option as you desire. Its available range is 1 to 30 seconds. If
you set this option to No Info Box, the information box will not
displayed when you switch services. However, pressing the
button displays the information box. If you set this option
to Never Hide, the information box will always be displayed.
You can raise or lower the position of the information box. Se-
lect the System Setting menu, and then set the Info Box Posi-
tion option as you desire. Its available range is
The more high the value is set, the more low the information
box will be positioned.
You can use the time shift feature with this digital receiver.
Time shift means that the most recent hour of the television
service you are watching is saved on the hard disk of the dig-
ital receiver. To enable this feature, select the System Setting
3.5 Adjusting the on-screen display 25
10 to
3 line.
Advertisement
Table of Contents
