Technical Functions; Connecting To Modem Via Putty (Windows); Connecting To Modem Via Minicom (Ubuntu) - Onlogic NWK030 Manual

Technical Functions

Connecting to Modem via PuTTY (Windows)

• In the Device Manager, find out which virtual COM the modem is attached to
» Open the 'Modems' category flyout,
» Right click the Qualcomm modem entry
» Select properties.
• The port number [n] is listed at the top of main page.
• Open PuTTY
» Select the Serial radio button in the main window.
» In the <<connection>> box, replace COM1 with the COM[n] from the modem properties.
» Set the baud rate to 9600
» Click Open.
• Make the modem "echo" back the commandes.
» In the terminal window, type
• ATE1 and press Enter. It is possible that no text will be displayed until the command is executed.

Connecting to Modem via Minicom (Ubuntu)

• From the Ubuntu terminal:
• sudo minicom -s
• Serial port setup
» Press a - change name to '/dev/ttyUSB1'
» Press g to change software flow control to YES
» Exit (this will drop you to a new shell)
• Make the modem "echo" back the commandes. In the terminal window, type
• ATE1
• You can now send any AT commands necessary
12
Cat M1 / NB-IoT Modem
US Office
Phone: +1 802 861 2300
Email: info@onlogic.com
www.onlogic.com
NWK030
EU Office
Phone: +31 088 5200 700
Email: info@onlogic.eu
www.onlogic.com