Page 1
NWK100: Extrovert 4G LTE Modem Ideal for today’s mobile, edge computing and Industrial Internet of Things applications, the NWK100 enables reliable cellular connectivity anywhere. onlogic.com/nwk100 Failover Protection For mission critical data, the NWK100 connects you to the 4G LTE network as...
The ANT2 represents the secondary RF input for the reception of the LTE RF signals for the Down-Link MIMO 2 x 2 radio technology supported by NWK100 as required feature for LTE category 4 UEs, and for the reception of 3G RF signals for the Down-Link Rx diversity radio technology supported by NWK100 as additional feature for 3G DC-HSDPA category 24 UEs.
Setting up AT terminal applications for communication with NWK100 Determine which COM port is being used by the NWK100. Open the Windows Device Manager (devmgmt.msc), then open the Modems flyout and right click the u-blox Modem device. Right-click Properties. On the Modem tab, the COM device used is listed at the top.
Extrovert 4G LTE Modem for AT&T NWK100 NWK100 setup for Internet browsing (Windows) Use the AT terminal to enter the following AT command lines: Perform the following procedure to activate an external PDP context with the preferred APN: Command sent bt DTE (user)
Page 8
Extrovert 4G LTE Modem for AT&T NWK100 NWK100 setup for Internet browsing (Windows) (cont.) Click on Properties: Search for “Internet Protocol Version 4 (TCP/IPv4)” and click on Properties: US Office EU Office Phone: +1 802 861 2300 Phone: +31 85 2733760 Email: info@onlogic.com...
Page 9
Extrovert 4G LTE Modem for AT&T NWK100 NWK100 setup for Internet browsing (Windows) (cont.) Check the Obtain an IP address automatically and Obtain DNS server address automatically option. If it is not possible to surf the web, then manually set the DNS server address: for example, use the DNS server returned by the network (in this example, 83.224.70.94)
Extrovert 4G LTE Modem for AT&T NWK100 AT Commands For a complete description and syntax of the AT commands supported by each TOBY-L2 series cellular module product version, see the u-blox AT commands Manual. For detailed examples of AT commands for network registration and configuration, context activation, data connection management, SIM management, module interfaces configurations and other settings, see the u-blox AT Commands Examples Application Note.