Table of Contents
Advertisement
Safety
1.2.3
Environmental protection
1.2.4
Modifications and repairs on the heat pump
1.3 Hazards
04.12.2015
Observe the regulations regarding waste avoidance and proper waste
recycling or disposal when performing any kind of work on and with the
heat pump.
Ensure that particularly during installation and maintenance work, as well
as when placing out of operation, pollutants such as grease, oil, refriger-
ant, solvent- containing cleaning fluids, etc. do not contaminate the
ground or enter the sewer system!
These materials must be collected, stored, transported and disposed of
in appropriate containers.
For safety reasons, no unauthorised modifications shall be performed on
the heat pump.
Thus, all intended modifications are subject to written approval by
WATERKOTTE.
Use only original spare parts from WATERKOTTE.
Original spare parts are specially designed for your heat pump. Externally
procured parts provide no guarantee that they are designed and manufac-
tured in compliance with relevant usage and safety requirements.
Parts and special equipment not delivered by WATERKOTTE are not ap-
proved for use on the heat pump.
Observe the following points to avoid life-threatening injuries and damages
to the heat pump during operation:
Warning! Risk of electric shock!
Do not use water or other liquids to clean the unit!
Keep all electrical supply units locked at all times!
Any work on the electrical equipment of the heat pump shall only be per-
formed by professional electricians!
Discharging refrigerant can cause severe personal injury (suffocation or hy-
pothermia)!
Avoid contact with refrigerant!
Note the minimum volume of the installation room and consider the type of
the refrigerant (EN 378-1).
Warning! Risk of suffocation!
The packaging is not a toy! The packaging must be disposed of environ-
mentally acceptable.
7 / 48
Copyright 2014 by: WATERKOTTE GmbH. Subject to changes.
Hide quick links:
Advertisement
Table of Contents
