Polycom EagleEye Director Quick Integration Manual page 10

Figure 15 - The fader min value of the Amplifier channel (left) and setting the value of the fader min on the ToLocalRoom group (right).
SoundStructure Volume Control Events
Next, let's review the Events that are associated with this project and ensure that the audio level to the EagleEye
Director stays synchronized with the audio level sent to Amplifier.
On the events page shown in Figure 16, there is a default event called _Polycom HDX to SST Volume that maps the
volume from the HDX codec, using the clink_volume parameter, to the fader value of the Amplifier channel. To keep the
level of the Amplifier and EagleEye outputs the same, edit this event by double clicking in the event and change the
Amplifier output to the ToLocalRoom output as shown in Figure 17.
Figure 16 - The default events for this project with the volume event highlighted.
10