Warning Signal Voice Mail; Setting The Prefix For Incoming Calls - Topcom CALLMASTER 220 Operating Manual

HANDL CALLM 220_SCAN
Callmaster 220

8.1 Warning signal Voice Mail

When this function is activated you will hear a warning signal every
time you receive a voice mail message (beep-beep every minute). The
default setting is OFF.
1. Press and hold the Program/Call button
Record button
2. Press the Program/Call button
3. Press the Record button
4. Press the Program/Call button

9. Setting the Prefix for incoming calls

This function in only useful when the Callmaster 220 is connected to a
telephone exchange. By setting a prefix, the prefix number will be
added to each incoming number.
To set the prefix, you have to do the following :
- Press and hold the Program/Call button
Record button
- Press the Program/Call button
PREFIX' appear on the display.
- Enter the desired Prefix number by using the Up and Down buttons
to select the numbers. Use the Record button
cursor to the right, and the Erase button Ø to delete the last
number and move the cursor to the left!
- Press the Program/Call button
13/3/02 4:42 pm
. The display shows " RESET VXXX".
a few times until you see
to turn the warning signal ON or OFF.
to confirm and to leave the menu.
. The display shows " RESET VXXX".
a few times until you see 'DIAL
to confirm the Prefix number.
22
Page 22
and then press the
.
and then press the
to move the