Operation; Setting The Language; Setting The Date And Time - Topcom CALLMASTER 220 Operating Manual

HANDL CALLM 220_SCAN
Callmaster 220

4. Operation

4.1 Setting the language

There are 3 display languages available. You can select the desired
language as follows:
1. Press and hold the Program/Call
Record
2. Press the Program/Call button
default language. To change the language, press the Record button
a few times until the right language appears.
3. Press the Program/Call button
setting ( see date and time setting).
Note: You can leave the program menu by pressing the Erase/Escape button Ø

4.2 Setting the Date and Time

When you have a subscription to the Caller ID service and your
telephone provider sends through the date and time together with the
telephone number, the clock will be set automatically.
It is also possible to set the clock manually:
1. Press and hold the Program/Call button
Record button
2. Press the Program/Call button
"DD/MM HH:MM"
3. Press the Up and Down buttons
4. Press the Record button
5. Repeat steps 3 and 4 to enter all 8 digits.
6. Press the Program/Call button
settings.
Note: If you have entered a wrong date or time, the unit won't leave the
date/time setting menu until you have set it correctly!
7. Press the Erase/Escape Ø button to leave the menu.
13/3/02
button. The display shows "RESET VXXX".
. The display shows " RESET VXXX".
to move the cursor.
11
4:42 pm Page 11
button and then press the
again. The display will show the
to confirm and to go to the next
and then press the
twice. The display shows:
to change the setting.
to confirm the date and time