Erase A Recorded Name From The Phone Book Entry; Outgoing Messages; Recording A General Outgoing Message (G-Ogm); Callmaster 220 - Topcom CALLMASTER 220 Operating Manual

HANDL CALLM 220_SCAN

Callmaster 220

5.2 Erase a recorded name from the Phone Book entry

- Press the Program/Call button
BOOK" on the display.
- Press the Up and Down buttons
is recorded to an entry, the recorded name will be pronounced
during the search!
- As soon as the number appears on the display, press the
Program/Call button
- Press the Erase button Ø twice to erase the recorded name from the
display entry.
6. outgoing messages (OGM)
After the announcement of the name or the number, the Callmaster
220 will check whether an outgoing message has been programmed.
When an OGM has been programmed, the unit will play the message
to the caller.
The telephone has two outgoing messages (OGM): one general OGM
(G-OGM) and one special OGM (
OGM) will be played for each incoming call. The special OGM (
OGM) is for specific callers and will only be played for the numbers it
has been linked to (max. 16 numbers). All numbers from the Call List,
the Phone Book and the Direct/Indirect memory can be linked to this
special OGM.

6.1 Recording a general outgoing message (G-OGM)

• Press the Program/call button
on the display.
• Press and hold the Record button
• Enter your message after the signal.
13/3/02 4:42 pm
once and you will see "PHONE
to search a number. If a name
a few times until you see 'RECORD NAME'.
-OGM). The general OGM (G-
until RECORD G-OGM appears
.
19
Page 19
-