UV Sterilisable Cabinet Instruction Manual Catalogue Numbers CSL-UVCAB CSL-UVCAB$ CSL-UVCABMIDI CSL-UVCABMIDI$ CSL-UVCABMINI CSL-UVCABMINI$ CSL-UVCABTY4 CSL-UVCABTY4$ CSL-UVCABMIDITY4 CSL-UVCABMIDITY4$ CSL-UVCABMTY4 CSL-UVCABMTY4$ Record the following for your records: Model _____________________ Catalogue No. _____________________ Date of Delivery _____________________ Warranty Period _____________________ Serial No. _____________________ Invoice No.
Safety Information When used correctly, these units pose no health risk. However, these units can deliver dangerous levels of electricity and are to be operated only by qualified personnel following the guidelines laid out in this instruction manual. Anyone intending to use this equipment should read the complete manual thoroughly These units comply with the following European directives: 2006/95/CE Low Voltage Directive and 2014/30/UE (official Title 2004/108/EC)
UV Light Safety Information All bench top UV Cabinets are powerful sources of UV Radiation that will cause rapid permanent damage to unprotected eyes and skin. Before operating any unit be sure that all personnel in the area are properly protected.
The unit should be checked for damage when received. Cleaver Scientific is liable for all missing or damaged parts / accessories within 7 days after customer received this instrument package. Please contact Cleaver Scientific immediately regarding this issue. If no response within such period from consignee party, that will be consignee party’s whole...
Specifications Catalogue No. CSL-UVCAB CSL-UVCABMIDI CSL-UVCABMINI Size (H x W x D cm) 77 x 58 x 42 62 x 58 x 42 45 x 58 x 35 Working Area (H x W x D cm) 60 x 53 x 41 42.5 x 53 x 39 27 x 53 x 32 Mains Fuse...
Operating Instructions Further information regarding setting up and running the UV Cabinet units can be found at www.cleaverscientific.com Installation 1. Check the cabinet and mains lead for any damage. DO NOT use if the system shows any sign of damage. 2.
Care and Maintenance Cleaning UV Sterilization Cabinets Cabinets are best cleaned using warm water and a mild detergent. Water at temperatures above 60°C can cause damage to the Cabinets. The cabinet should be thoroughly rinsed with warm water or distilled water to prevent buildup of residues but care should be taken not to damage the light unit and bulbs.
Replacing the Lamps: In the course of time, the lamps will diminish in their output. It is therefore recommended that all the lamps are changed at the same time, for uniform efficiency. Please use a qualified safety engineer to replace and check the operation of the lamps.
Warranty The Cleaver Scientific Ltd. UV Cabinets units have a warranty against manufacturing faults of twelve months from date of customer receipt. If any defects occur during this warranty period, CSL will repair or replace the defective parts free of charge.
Need help?
Do you have a question about the CSL-UVCAB Series and is the answer not in the manual?
Questions and answers