Flex CA 18.0 Operating Manual page 9

Maintenance and care
WARNING!
Before performing any work, pull out the
mains plug. Do not use water or liquid
detergents.
 Remove dirt and dust from the housing
with a paint brush or dry cloth.
Repairs
Repairs may be carried out by an authorised
customer service centre only.
Exploded drawings and spare-part lists can
be found on our homepage:
www.flex-tools.com
-Declaration of Conformity
We declare under our sole responsibility
that the product described under "Technical
Data" conforms to the following standards
or normative documents:
EN 60335-1, EN 60335-2-29, EN 55014-1,
EN 55014-2, EN 61000-3-2, EN 61000-3-3,
2014/35/EU, 2014/30/EU.
Responsible for technical documents:
FLEX-Elektrowerkzeuge GmbH, R & D
Bahnhofstrasse 15, D-71711 Steinheim/Murr
Eckhard Rühle
Manager Research &
Development (R & D)
22.07.2016
FLEX-Elektrowerkzeuge GmbH
Bahnhofstrasse 15, D-71711 Steinheim/Murr
10
Klaus Peter Weinper
Head of Quality
Department (QD)
Disposal information
WARNING!
Render redundant power tools unusable
by removing the power cord.
EU countries only:
Do not throw electric power tools into the
household waste! In accordance with the
European Directive 2012/19/EU on Waste
Electrical and Electronic Equipment and
transposition into national law used electric
power tools must be collected separately and
recycled in an environmentally friendly
manner.
Recycling raw materials instead
of waste disposal.
Device, accessories and packaging should
be recycled in an environmentally friendly
manner. Plastic parts are identified for
recycling according to material type.
WARNING!
Do not throw accumulators/batteries into the
household waste, fire or water.
Do not open disused batteries.
Accumulators/batteries should be collected,
recycled or disposed of in an environmentally
friendly manner.
EU countries only:
In accordance with Directive 2006/66/EC
defective or used batteries must be recycled.
NOTE
Please ask your dealer about disposal
options!
Exemption from liability
The manufacturer and his representative
are not liable for any damage and lost profit
due to interruption in business caused
by the product or by an unusable product.
The manufacturer and his representative
are not liable for any damage which was
caused by improper use of the power tool
or by use of the power tool with products
from other manufacturers.
CA 10.8/18.0