Midea BLANC Series Owner's Manual page 51

Operation of buttons
Temp
1
3
Mode
4
OK
5
Timer Options
6
Super
7
Model: RG70E3(2)/BGEF
10
1 1
2
8
Fan
9
10
11
12
12
13
Button(for RG70E3(2)/BGEF only)
Swing
Used to stop or start horizontal louver move-
ment or set the desired up/down air flow
direction. The louver changes 6 degree in
angle for each press. If keep pushing more
than 2 seconds, the louver will swing up and
down automatically.
OK Butto
Used to confirm the optional functions.
Direct Button for RG70E(2) series only)
Used to set the desired air flow direction.
The louver changes 6 degree in angle for
each press.
Button(for RG70E3(2)/BGEF only)
Swing
Used to stop or start vertical louver movement
and set the desired left/right air flow direction.
The louver changes 6 degree in angle for each
press. If keep pushing more than 2 seconds,
the louver will swing left and right automatically.
Options Button
Press this button to select the air conditioner
function in a sequence of following:
Fresh
Follow me
Repellent Sleep
Press the Options button to select the desired
function, the selected symbol will flash on
the display area, then press the OK button
to confirm.
FRESH function(
When the FRESH function is initiated, the
Ionizer/Plasma Dust Collector(depending on
models) is energized and will help to
remove pollen and impurities from the air.
FOLLOW ME function(
When the Follow Me function is activated,
the remote display is actual temperature
at its location. The remote control will send
this signal to the air conditioner every 3
minutes interval until press the FOLLOW
ME button again.
51
Self clean
)
)