Midea BLANC Series Owner's Manual page 50

Operation of buttons
Temp
1
3
Mode
4
OK
5
Timer Options
6
Super
7
Model: RG70E2(2)/BGEFU1
RG70E2(2)/BGEF
6
2 7
8
Fan
9
Swing
10
Direct
11
12
8
13
9
Super Button
Press this button under cooling operation,
the set temperature will change to 17
the fan speed shift to high and bring faster
cooling operation.
Press this button under heating operation,
the set temperature will change to 30
the fan speed shift to high and bring faster
heating operation.
NOTE:
This function is not available under AUTO,
DRY,FAN,Self Clean or Comfort mode.
Press MODE,FAN,SLEEP or ECO button
will cancel Super function.
Do Not Disturb Button(
Press this button to turn off the indoor screen
display, and also turn off the Air conditioner
buzzer, the fan speed shifts to low, which
create a comfortable and quiet environment.
Press it again to cancel this function.
Under Do Not Disturb mode, the display
will illuminate for 10 seconds while adjusting
the mode, set temperature or fan speed, etc.
Fan Button
Selects fan speeds in the following order:
g
AU 20%
g 40%
Press the Temp
increase/decrease the fan speed in 1%
increments.
NOTE：
You can not switch the fan speed in AUTO
or DRY mode.
Hold down this button for at least 2 seconds
to activate/cancel Silent mode. Due to low
frequency operation of compressor, it may
result in insufficient cooling and heating
capacity (applicable to the air conditioner
with Silent feature only)
Press Fan, MODE, Sleep, ON/OFF ,ECO or
Gear button will cancel the Silent function.
Swing Butto for RG70E(2) series only)
Used to stop or start horizontal louver
movement. The louver will swing up and
down automatically.
50
O C(62
C(86
O
)
g
g g
F%.
60%
80%
or Temp button to
o F),
F),
o