Table of Contents
Advertisement
V2802A Option M81
General Specifications
General Specifications
Specifications for the Distribution Unit (400 MHz to 6.0 GHz) are characteristic
performance. A functional test certificate is offered only for the Distribution Unit.
Power Requirements
Verify that the required ac power is available before installing the Distribution Unit.
•
•
•
•
This is a Safety Class I Prod uct (provided with a protective earthing ground
incorporated in the power cord). The mains plug shall only be inserted in a socket
outlet provided with a protective earth contact. Any interruption of the protective
cond uctor inside or outside of the prod uct is likely to make the prod uct dangerous.
Intentional interruption is prohibited.
Environmental Requirements
Refer to the standard documentation for environmental requirements.
Environmental Tests
The Distribution Unit complies with all applicable safety and regulatory requirements
for the intended location of use.
•
•
100/120 Vac
220/240 Vac 50/60 Hz
40 Watts
The instruments can operate with mains supply voltage fluctuations up to ± 10%
of the nominal voltage.
Air conditioning equipment (or other motor–operated equipment) should not be
placed on the same ac line that powers the Distribution Unit.
Altitude (Operation )
3,000 meters (~10,000 feet)
The instrument can safely operate in a relative humidity of 80% for temperatures
to 31 degrees C, decreasing linearly to 50% relative humidity at 40 degrees C.
7
Advertisement
Table of Contents
