Topcom Skyr@cer WBR 7101GMR User Manual page 77

Add PC
Parameters
Client PC Description
Client PC IP Addresses
Client PC Service
Protocol
Description
The description for this client PC rule.
Enter the IP address range that you wish to apply this
Access Control rule. This is the user's IP address(es)
that you wish to setup an Access Control rule.
Note: You need to give your LAN PC clients a
fixed/static IP address for the Access Control rule to
work properly.
You can block the clients from accessing some
Internet services by checking the services you want
to block.
This allows you to select UDP, TCP or both
protocol type you want to block.
77