Topcom Skyr@cer WBR 7101GMR User Manual page 57

bandwidth for it. The packets of applications with higher priority will always go first.
Lower priority applications will get bandwidth after higher priority applications get
enough bandwidth. This can let you have a better experience in using critical real time
services like Internet phone, video conference ...etc. You can adjust the priority of the
rules by moving them up or down.
Note: If the total assigned bandwidth of higher priority applications is larger than
the maximum bandwidth provided by the WAN port, the other applications will not
get any bandwidth.
Parameters
Enable/Disable QoS
Add a QoS rule into the table
Remove QoS rules from the table
Description
You can check "Enable QoS" to enable QoS
function for the WAN port. You also can uncheck
"Enable QoS" to disable QoS function for the
WAN port.
Click "Add" then you will enter a form of the QoS
rule. Click "Apply" after filling out the form and
the rule will be added into the table.
If you want to remove some QoS rules from the
table, select the QoS rules you want to remove
in the table and then click "Delete Selected". If
you want remove all QoS rules from the table,
just click "Delete All" button. Click "Reset" will
clear your current selections.
57