Topcom Skyr@cer WBR 7101GMR User Manual page 45

AP Bridge-WDS mode setting page
Parameters
Mode
Band
ESSID
Channel Number
MAC address
Default
default
11
Description
It allows you to set the AP to AP, Bridge or WDS
mode.
It allows you to set the AP fix at 802.11b or
802.11g mode. You also can select B+G mode
to allow the AP select 802.11b and 802.11g
connection automatically.
This is the name of the wireless LAN. All the
devices in the same wireless LAN should have
the same ESSID.
The channel used by the wireless LAN. All
devices in the same wireless LAN should
use the same channel.
If you want to bridge more than one networks
together with wireless LAN, you have to set this
access point to "AP Bridge-Point to Point mode",
"AP Bridge-Point to Multi-Point mode" or "AP
Bridge-WDS mode". You have to enter the MAC
addresses of other access points that join the
bridging work.
45