Vertu Signature NPM-7 User Manual page 82

Hide thumbs Also See for Signature NPM-7:
Table of Contents

Advertisement

All manuals and user guides at all-guides.com
B A T T E R Y
Caution. Do not dispose of batteries in a fire and
always dispose of a battery according to local
regulations. Do not dispose of as household waste.
Always switch the phone off and disconnect the
charger before removing the battery.
Do not remove the release tab or the protective
plastic film from the battery as this will damage the
battery.
R E M O V I N G T H E B ATT E R Y
Switch off your Vertu phone and disconnect the
>
charger and any accessories.
With the back of your Vertu phone facing you, position
>
the back cover release key (01) very carefully into the
slot of the locking screw. Ensure the key does not slip
out of the slot.
Turn the locking screw (02) a quarter of a turn
>
anti-clockwise, and gently lift off the back cover as
shown. If you accidentally remove the back cover while
the phone is switched on, the phone will automatically
switch off.
0 3
Hold the release tab (03) and pull upwards to remove
>
the battery from your Vertu phone.
If you do not re-insert the battery or insert another
>
battery immediately, insert the plastic placeholder (04)
0 1
originally supplied with your Vertu phone before
replacing the cover. This will make it easier to remove
the back cover.
Your Vertu phone will lose its date and time settings
if the battery is removed for more than approximately
02
120 minutes.
I N S TA L L I N G T H E B ATT E R Y
0 6
Insert the battery (05) bottom end first with the release
>
tab (06) facing up from the rear of the phone. Ensure
that the contacts on the top end of the battery align
with the contact points (07) inside the battery
compartment.
Ensure that the battery is seated correctly before
>
replacing the back cover.
0 5 A C C E S S O R I E S A N D B A T T E R Y
V E R T U
0 4
0 5
07
07
5-3

Advertisement

Table of Contents
loading

Table of Contents