Kohler Command PRO EFI PCV680 Service Manual page 8

Specifi cations
TORQUE SPECIFICATIONS
Intake Manifold
Fastener (torque in 2 increments)
Manifold Absolute Pressure (MAP) Sensor Fastener
(Engines with Separate MAP and Intake Air Temperature
Sensors)
Temperature/Manifold Absolute Pressure (TMAP) Sensor
Fastener (Engines with Combined Sensor)
Air Cleaner to Throttle Body Fastener Nut
Air Cleaner Mounting Bracket Fastener
Fuel Injector Cap Fastener
Muffl er
Retaining Nut
Oxygen Sensor
Oil Cooler
Oil Cooler/Adapter Nipple
Fastener
Into Blower Housing
Between Oil Cooler Hoses
Oil Pan
Fastener
Speed Control Bracket
Fastener assembled to cylinder heads
Fastener assembled to blower housing
Starter Assembly
Thru Bolt
Mounting Screw
Brush Holder Mounting Screw
Starter Solenoid
Mounting Hardware
Nut, Positive (+) Brush Lead
Stator
Mounting Screw
Valve Cover
Fastener
Values are in Metric units. Values in parentheses are English equivalents.
3
Lubricate threads with engine oil prior to assembly.
5
8
3,5
KohlerEngines.com
PCV680, PCV740
fi rst to 7.8 N·m (69 in. lb.)
fi nally to 10.5 N·m (93 in. lb.)
7.3 N·m (65 in. lb.)
7.3 N·m (65 in. lb.)
8.2 N·m (73 in. lb.)
5.8 N·m (51 in. lb.)
7.3 N·m (65 in. lb.)
27.8 N·m (246 in. lb.)
50.1 N·m (37 ft . lb.)
28.5 N·m (21 ft . lb.)
2.8 N·m (25 in. lb.)
2.3 N·m (20 in. lb.)
25.6 N·m (227 in. lb.)
10.7 N·m (95 in. lb.) into new holes
7.3 N·m (65 in. lb.) into used holes
2.8 N·m (25 in. lb.) into new holes
2.3 N·m (20 in. lb.) into used holes
5.6-9.0 N·m (49-79 in. lb.)
16.0 N·m (142 in. lb.)
2.5-3.3 N·m (22-29 in. lb.)
4.0-6.0 N·m (35-53 in. lb.)
8.0-11.0 N·m (71-97 in. lb.)
6.2 N·m (55 in. lb.) into new holes
4.0 N·m (35 in. lb.) into used holes
6.2 N·m (55 in. lb.)
24 690 31 Rev. D