Advertisement
configuration file of the ppp id only at the FTP server specify
by upgradeaddr
upgradeaddr item .
account: IP phone will find matching firmware binary file and
account:
n
configuration file of the account only at the FTP server specify
by upgradeaddr
upgradeaddr item .
phonenumber: VP200 phone will find matching firmware binary file
phonenumber
n
and configuration file of the phone only at the FTP server specify
by up
gradeaddr item .
upgradeaddr
upgrade addr: Put IP address or domain name obtained by ISP of FTP
upgrade addr:
server supplying upgrade program into this field.
sntp ip: Fill IP address of time server here. When network without
sntp ip:
Internet connect, Fill special IP address 255.255.255.255.
use daylight: Enable/disable daylight.
use daylight:
timezone: Select correct time zone in list box.
timezone:
When debug set as 0[disable], if input ordinary password (default one is
1234), then following page will pop up after clicking
only those parameters can be modified.
. And
- 26 -
Advertisement
