Advertisement
iptype: Set how IP phone gets relevant network parameters by
iptype
selecting corresponding item from drop down list.
static ip: Select this item to authorize users set IP address,
static ip
n
subnet mask and router IP address of IP phone manually.
dhcp: Select this item to enable DHCP mode. With this system, your
dhcp
n
LAN or router automatically assigns all the required network
parameters to any device connected to it when the device log on.
VP200 IP phone is shipped from the factory with DHCP on. So, if your
LAN or router is configured to use DHCP addressing, the IP phone s
LAN parameters will automatically be configured as soon as it is
connected to the LAN or router and powered up.
Those ADSL and Cable Modem users please select this item for
pppoe
pppoe
n
it is a protocol especially designed for them. With this system,
ADSL ISP automatically assigns all the required IP parameters to
any device connected to it when the device log on.
modem
modem
If the IP phone used with modem, please select this item to
n
get relevant network parameters auto. Then please fill ID and pin
into ppp id and ppppin fields.
ppp id: With pppoe
pppoe or modem
ppp id:
enter the user name here.
modem selected in iptype
iptype drop down list, please
- 13 -
Advertisement
