Advertisement
When
nat traversal
nat traversal
stun server into
address : service port . The default service port for stun is 3478.
nat ttl: When IP phone sit behind a NAT device, it will send packets
nat ttl:
to server every
NAT device alive.
default value is 20.
phone number: The local phone number or username of this phone,
phone number:
usually is allocated by system.
account: With SIP system which requires authentication, please put
account
the username/account into this field.
pin: With SIP system which requires authentication, please put the
pin:
password into this field.
register port: The local UDP port registered with server to accept
register port:
incoming handshaking messages. The default port number is 5060.
rtp port: RTP port is the port transferring and receiving voice
rtp port:
packets using UDP protocol. This is an even number between 1024 and
65535.
tos: Set the TOS field of the IP header of the RTP packets. The bigger
tos:
is set to
stun
stun
, in the format as
nat addr
nat addr
nat ttl
nat ttl
seconds to keep the port mapping on the
nat ttl
nat ttl
is an integer between 10 and 65535,
, please put the URI of the
domain name/IP
- 23 -
Advertisement
