Yealink SIP T42G Manual page 50

All manuals and user guides at all-guides.com
User Guide SIP-T42G IP Phone
Usage:
1. Press the DSS key to access the LDAP search interface.
2. Enter a few continuous characters of the contact name or continuous numbers of
the contact phone number using the keypad.
The contacts whose name or phone number matches the characters entered will
appear on the LCD screen.
Conference
You can use this key feature to set up a conference call. For more information, refer to
Conference on page 66.
Dependencies: Type (Key Event)
Key Event (Conference)
Label (key label displayed on the LCD screen)
Value (the number you want to add to the conference)
Usage: Press the DSS key during an active call to set up a conference with the number
specified in the Value field.
Note
When leaving the Value field blank, the DSS key performs the same as the Conference
soft key during a call.
Forward
You can use this key feature to forward an incoming call to someone else. For more
information, refer to
Dependencies: Type (Key Event)
Key Event (Forward)
Label (key label displayed on the LCD screen)
Value (the number you want to forward to)
Usage: Press the DSS key to forward an incoming call to the number specified in the
Value field.
Note
When leaving the Value field blank, the DSS key performs the same as the Forward soft
key when receiving an incoming call.
Transfer
You can use this key feature to handle the call differently depending on the transfer
mode on DSS key when there is an active call on the phone.
Dependencies: Type (Key Event)
Key Event (Transfer)
Label (key label displayed on the LCD screen)
42
Call Forward on page 61.