Growatt SPF 5000 ES User Manual page 10

CAN communication type
Note: when the battery type set to Li, the setting option 12, 13, 21 will change to display percent.
Note: when the battery type set as "LI", the Maximum charge current can't be modified by the user. When the
communication fail, the inverter will cut off output.
Setting SOC point back to
utility source when selecting
12
"SBU priority" or "Solar first"
in program 01
Setting SOC point back to
battery mode when selecting
13 "SBU priority" or "Solar first"
in program 01
Low DC cut-off SOC
If "LI" is selected in program 5,
21
this program can be set up
Note: any questions about communicating with BMS, please consult with Growatt.
Protocol 51
Protocol 52
.
.
.
Protocol 65
Default 50%, 20%~50% Settable
Default 95%, 60%~100% Settable
Default 20%, 5%~30% Settable
8
.
.
.