Advertisement
IntelliVue Arm Assembly Instructions
step 2
attach wall track.
All tracks have 3/8" diameter mounting
holes positioned 6" center to center apart.
Wall Track
Determine where you will be placing the
Part No. 8326-#-XXX
track and drill appropriate holes.
Position the mount track (8326-#-XXX)
on the wall.
Insert mounting screws (P701274)
through the pre-drilled holes on the track.
Use 3/16" Allen wrench (P701311) and
1/4-20 x 1-3/4"
tighten the screws in the wall.
Socket Cap Screw
Part No. P701274
The length of the track you've selected
will depend on how many mounting holes
there are and how many mounting screws
(P701274) you will need. For this example
a 19" track has been selected.
NOTE: Do not fasten directly into sheetrock,
plaster or dry wall. Consult the facilities personnel,
installer or your local hardware store if you have
any questions on what fastener is appropriate for
your wall surface.
9
Advertisement
